Receiver/Amplifier dual-cooling fans with enlarged bases & multi-speed control

Description

Dual-Fan Quiet Component Cooling system with an Enlarged Air-chamber base & multi-speed control
These two 80mm fan units are designed sit on
your component’s top air vents.
Each fan has a special raised air-chamber base, which covers twice the area of a standard fan.
A vortex of air is pulled out of the top of your component over the full area of these raised
bases.
In addition, you control the speed of the fans, with the multi-voltage power transformer.
Plug
the power unit into a switched AC outlet on your system, and the fans
will only come on when the equipment is turned on or the switch is
activated.  This cooling system is intended for Amplifiers, Receivers and other components with top air vents — especially Onkyo, Sony, and other hot receivers.
What’s
Included?
THE COOLING SYSTEM INCLUDES:
1 x Dual 80mm fan unit,  1 x multi-speed power transformer, and printed installation instructions.
Note:
I
n the listing pictures, the component cooling systems are shown in two views:  1) On top of a receiver or other component to show how it is used and 2) against a colored panel, displaying the complete system.
These components and panels are used for display purposes only, and are not included with the system.
1 x dual-80mm
fan unit, with
raised airchamber
bases. Each base
doubles the area
where air enters
the fans. The
fans can be
separated up to
20″ apart.
1 x multi-speed
power transformer,
with a 4-1/2 foot
cable.  You can
choose from 6
different speeds
for the fans.
Features
This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
Each fan unit has a specially-constructed raised air-chamber base that enlarges the area of air flow, while also sealing air and preventing vibrations.
Each air-chamber base covers twice the area of a standard fan.
Includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this multi-speed transformer, which can be set to any one of 6 different speeds.
Plug
the power unit into a switched AC outlet on your system, and the fans
will only come on when the equipment is turned on or the switch is
activated.
INTERNATIONAL BUYERS:  The unit’s power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.
Contact me if you need an adapter plug (there is no charge), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
Even at medium speeds settings, the fans will replace a volume of air equal to that of most components several times per minute.
All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
The system comes completely assembled, with all components installed, wired and ready to go!
Just plug it in, and drop the fans on top of your receiver.
Specifications
Fan dimensions:
Each fan unit is 4-3/4″ square, 1-1/2″ tall (including the top grill and air-chamber base), and only requires 3/8″ of space above for air flow.
Maximum current draw:
.32 amps or 3.85 watts.  Normal operation (at lower speeds) will draw less current and watts.
Bearing type:
Super quiet, long lasting Fluid Dynamic bearings.
The table below shows specifications for
both of the 80mm fans running together
, at several different speeds.
The shaded area on the table indicates suggested
fan speeds for this system.
With cabinet cooling, slow (and quiet) are the way to go!
Fan Speed
Full
3/4
2/3
1/2
1/3
1/4
CFM (cubic feet of air per minute)
62
46
40
32
20
16
DB (decibels/ noise level)
22
19
16
13
10
7
Fan RPM (speed)
2000
1500
1320
1000
660
500
If you would like to see this cooling system’s installation instructions, please contact me and I will supply a .PDF file with the contents.
Payment, Shipping
& Warranty
Payment:
You can pay using Paypal, or by using a major credit card, after your purchase.
Shipping:
Within the U.S., shipping is normally by Priority Mail.  For International shipments, I use USPS First Class International.
Import duties, etc.:
International Buyers
– Please Note:
Import duties, taxes and charges are
not
included
in the item price or shipping charges. These charges are
the buyer’s responsibility.  Please check with your country’s customs
office to
determine what these additional costs will be prior to bidding/buying.
Returns:
Within
the first 30 days after receipt, systems which are in original
condition can be returned for a full refund of the purchase price. 
Please contact me for shipping address and instructions
.
Warranty:
All systems are covered by a 12 months parts & labor warranty.
YOUR SATISFACTION IS GUARANTEED!
Custom Systems
Please contact me if you
have any questions, or if you want to discuss a custom cooling system
to fit your special needs:
Click here to ask a question
You can also visit my Ebay store, where you will find systems designed for a number of different cooling needs:
Click here for my store
All text and images on this page (other than those provided by
Ebay), copyright © 2007-2018 by DR McKenzie. Rev. 051717